Following are list of available objects in JTB Batch Change. Each object has properties and commands.
For graphical objects, each object inherit all properties and commands of All Entities.
OBJECTS |
VALUES LIST |
DESCRIPTION |
|
1. NAMED OBJECTS (NON GRAPHICAL OBJECTS) |
|
||
Drawing |
|
You can add, modify or delete custom properties at DwgProps spreadsheet |
|
Name |
|
No Folder Path nor .dwg extension included. |
|
Title |
|
|
|
Author |
|
|
|
Subject |
|
|
|
Keywords |
|
|
|
Revision Number |
|
|
|
Comments |
|
|
|
Command |
Purge & Audit |
|
|
Block Definition |
|
|
|
Name |
|
|
|
Explodable |
True, False |
|
|
IsDynamicBlock |
True, False |
|
|
Units |
Unitless, mm, inch, cm, m |
Change unit will not effect existing block references. |
|
Command |
Merge, Replace, Delete, Delete All Refs |
Delete command will avaiable only if object is not referenced. Replace command will replace all inserted blocks with new block specified at Name's new value Merge = Replace + Delete original. Delete All Refs = Delete all inserted references then delete the definition. |
|
Xref |
|
|
|
Name |
|
Change this won't effect the xref drawing's path |
|
FileName |
|
Non case-sensitive |
|
FolderPath |
|
Non case-sensitive |
|
Command |
Unload, Reload, Detach |
|
|
Layout |
|
|
|
Name |
|
|
|
Command |
Delete |
|
|
Layer |
|
||
Name |
|
|
|
Description |
|
|
|
LayerOn |
True, False |
|
|
Freeze |
True, False |
|
|
Lock |
True, False |
|
|
LineType |
|
|
|
Lineweight |
ByLayer,ByBlock,Default,0.00,0.05,0.09,0.13,0.15,0.18,0.20,0.25,0.30,0.35,0.40,0.50,0.53,0.60,0.70,0.80,0.90,1.00,1.06,1.20,1.40,1.58,2.00,2.11 |
|
|
Color |
|
Value can be: "By Layer", "By Block", an integer as Acad Color Index or 3 integers of (Red, Green, Blue) (For example: (255,100,50)) |
|
Command |
Merge, Replace, Delete, Delete All Refs |
Delete command will avaiable only if Layer is empty. Replace command will change layer of all entities on this layer. Merge = Replace + Delete original. Delete All Refs = Delete all entities on this layer, then delete the layer's definition. |
|
TextStyle |
|
|
|
Name |
|
|
|
Font |
|
Should be the exactly Font name appear in AutoCAD Style dialog box |
|
BigFontFile |
|
Should be the exactly Font name appear in AutoCAD Style dialog box |
|
Width |
|
|
|
ObliqueAngle |
|
A value from -85 to 85 degrees |
|
Command |
Merge, Replace, Delete, Delete All Refs |
+ Delete command will avaiable only if style is unused. + Replace command will change style of all reference entities + Merge = Replace + Delete original. + Delete all Refs = Delete all reference entities, then delete the definition. |
|
DimStyle |
|
|
|
Name |
|
|
|
Command |
Merge, Replace, Delete, Delete All Refs |
+ Delete command will avaiable only if style is unused. + Replace command will change style of all reference entities + Merge = Replace + Delete original. + Delete all Refs = Delete all reference entities, then delete the definition. |
|
LineType |
|
|
|
Name |
|
|
|
Command |
Merge, Replace, Delete, Delete All Refs |
+ Delete command will avaiable only if style is unused. + Replace command will change style of all reference entities + Merge = Replace + Delete original. + Delete all Refs = Delete all reference entities, then delete the definition. |
|
UCS |
|
|
|
Name |
|
|
|
Command |
Delete |
|
|
View |
|
|
|
Name |
|
|
|
Command |
Delete |
|
|
Material |
|
|
|
Name |
|
|
|
Command |
Merge, Replace, Delete, Delete All Refs |
+ Delete command will avaiable only if style is unused. + Replace command will change style of all reference entities + Merge = Replace + Delete original. + Delete all Refs = Delete all reference entities, then delete the definition. |
|
Page Setup |
|
Including each Layout's Plot Configuration |
|
Name |
|
ReadOnly for [Layout] object |
|
Plot Device |
|
Name of PC3 or Printer name. Set this to "None" to clear saved specification. |
|
Command |
Delete |
|
|
Plot Device |
|
This will change Plot Device of pagesetups and layouts |
|
Name |
|
Name of PC3 or Printer name. Set this to "None" to clear saved specification. |
|
Command |
|
|
|
GRAPHICAL OBJECTS (entities and nested entities) |
|
||
All Entities |
|
Shared common properties to all others |
|
Color |
|
Value can be: "By Layer", "By Block", an integer as Acad Color Index or 3 integers of (Red, Green, Blue) (For example: (255,100,50)) |
|
Layer |
|
Will add new layer if new layer's name doesnot exist. |
|
LineType |
|
|
|
LineTypeScale |
|
|
|
Lineweight |
ByLayer,ByBlock,Default,0.00,0.05,0.09,0.13,0.15,0.18,0.20,0.25,0.30,0.35,0.40,0.50,0.53,0.60,0.70,0.80,0.90,1.00,1.06,1.20,1.40,1.58,2.00,2.11 |
|
|
Material |
|
|
|
Thickness |
|
|
|
Visible |
True, False |
|
|
Owner Name |
|
Avaiable values are: "Model", or "Layout" (Paper Space), or a block name where this object resides, or layout's name. If this is an Attribute Reference, Owner Name is the container block's name. |
|
Command |
Flatten, Delete |
Command Flatten will turn all Z Coordinate to 0 and Normal Vector to WCS (0,0,1) |
|
Arc |
|
||
Radius |
|
|
|
Length |
|
To delete Zero Arc, put Find Value = < 0.00001, then set Command to Delete |
|
Circle |
|
|
|
Radius |
|
|
|
Length |
|
|
|
Point |
|
|
|
Line |
|
|
|
Length |
|
To delete Zero Arc, put Find Value = < 0.00001, then set Command to Delete |
|
Polyline |
|
Included Polyline, LWPolyline, 3D Poly |
|
Length |
|
To delete Zero Arc, put Find Value = < 0.00001, then set Command to Delete |
|
Ellipse |
|
|
|
Spline |
|
|
|
Hatch |
|
|
|
PatternName |
|
|
|
PatternScale |
|
|
|
PatternAngle |
|
|
|
Attribute |
|
|
|
Text |
|
|
|
Height |
|
|
|
Rotation |
|
|
|
Width Factor |
|
|
|
Oblique Angle |
|
|
|
StyleName |
|
|
|
Tag |
|
Tag should not contain space. Otherwise, spaces will be automatically converted to "_" |
|
Prompt |
|
|
|
AttributeRef |
|
|
|
Text |
|
|
|
Height |
|
|
|
Rotation |
|
|
|
Width Factor |
|
|
|
Oblique Angle |
|
|
|
StyleName |
|
|
|
Tag |
|
Tag should not contain space. Otherwise, spaces will be automatically converted to "_" |
|
Text |
|
|
|
Text |
|
|
|
Height |
|
|
|
Rotation |
|
|
|
Width Factor |
|
|
|
Oblique Angle |
|
|
|
StyleName |
|
|
|
Mtext |
|
|
|
Text |
|
|
|
Height |
|
|
|
Rotation |
|
|
|
StyleName |
|
|
|
Dimension |
|
|
|
StyleName |
|
|
|
ScaleFactor |
|
|
|
LinearScaleFactor |
|
|
|
Text |
|
This is the Text Override value. |
|
TextStyle |
|
|
|
Leader |
|
|
|
StyleName |
|
|
|
ScaleFactor |
|
|
|
Table |
|
|
|
StyleName |
|
(Table Style Name) |
|
TextStyle |
|
Cell's text style |
|
Text |
|
Cell's text |
|
BlockRef |
|
Including MInsertBlock, BlockReference |
|
Name |
|
Change block name to will replace all inserted block of Find Value with new inserted block of specified New Value. (Similar to Replace command in Block Defininition) |
|
Rotation |
|
In Degree |
|
Command |
Uniformalize, ConvertToStatic, ConvertToAnony |
+ Uniformalize: set absolute values of X, Y, Z scales equal. This is helpful especially to fix "inactive" dynamic blocks. + ConvertToStatic convert dynamic block to normal block. + ConvertToAnony convert block to unnamed block. |